vgb22522
 
 
 
VGB15022 and VGB22522
Gate Bolts
 
 
HGB and VGB gate bolts throw or shoot a similar distance beyond the ends of the support plate.    Accordingly, these products are not handed.
When in a closed position or an open position the locking bolt can be secured using a variety of padlocks.
These products are designed to resist accidental damage and vandalism and the 22mm locking bolts have even been known to survive vehicle impacts.
Basic models
Model HGB90 may be installed to the leading edge of a gate and has a nominal throw of 95mm. This model is supplied with a RGB10028 retainer plate. Both can be installed with M8 fasteners (not supplied).
Models VGB15022 and VGB22522 may be installed to the top or bottom edge of a gate and have a nominal throw of 150mm and 225mm respectively. These models are supplied with a GGB5025 guide bracket, but a ground socket or retainer plate is not supplied and must be ordered as an additional part if required. Both modles can be installed with M8 fasteners (not supplied).
Finishes
All parts are hot dip galvanised.